Rascal 600B/700B Owner’s Manual
EMC Part: 19278100 Rev. 3
◦
06/29/2009
13
Hazard Switch
The Rascal Balance includes Hazard Indicators to alert others that you’ve
stopped or require assistance. Pressing the Hazard Switch flashes front
and rear amber lamps. Pressing again turns lamps off.
Seat Lift Switch (For Vehicles equipped with 5” seat lift actuator)
Use this switch to raise and lower the seat automatically. With the switch
on, when squeezing the right side engager lever you will raise the seat.
Using the left side engager lever lowers the seat. The keyswitch on the
dash must be in the “On” position for the Seat Lift to operate. If the
scooter does not include the Seat Lift, this switch will not function and the
vehicle will be operable when the engager lever is squeezed. When
applicable, always check switch position before using the scooter (driving
or raising/lowering the seat).
Note: If unit is equipped with Seat Lift the scooter will not
operate in forward or reverse if seat lift switch is in seat
lift mode. We recommend that the seat lift is in the “down”
position before riding the vehicle on inclines.
