Rascal 600B/700B Owner’s Manual
EMC Part: 19278100 Rev. 3
◦
06/29/2009
19
In addition to width adjustments, the armrests of the seat can be set at
different angles for greater comfort. Follow these instructions to adjust
armrest angle.
• Lift armrest to full up position.
• Locate adjustment bolt within armrest joint. Turn bolt to vary armrest
angle (wrench may be needed).
• Put armrest down into riding position and test for comfort before riding.
Adjusting Backrest Angle
The seat is designed with three available backrest settings (90°, 95°,
100°) to allow you to adjust the angle of the back of your seat. The 90°
setting provides the most upright position. Adjustment locations are
shown in Illustration 5B.
The wrench and Allen key that come with the scooter is used in these
adjustments.
To adjust the backrest angle:
• Remove the nut and bolt on the hinge using the supplied wrench and
Allen
key.
• Reinstall the hardware into the desired seat back angle setting.
• Choose the position that is most comfortable for the user or as
recommended by a seating professional.
• Be sure to set both sides in the same position.
ILLUSTRATION 5B – Adjusting Backrest Angle
