Rascal 600B/700B Owner’s Manual
EMC Part: 19278100 Rev. 3
◦
06/29/2009
21
Adjusting the Dash and Handlebar Positions
Both the dash and handlebar include adjustments to allow them to be
positioned according to your individual riding style. The angle of the dash
can be adjusted up or down for maximum comfort and easier use of dash
controls. The entire handlebar assembly can also be adjusted through a
movable handle at the base of the lower handlebar. Dash and handlebar
adjustments are shown in Illustrations 7 and 8.
Adjust dash angles so that your elbows can rest on the arm pads while you
operate your Rascal and you can see the dash controls.
• Sit in seat facing forward.
• Lift dash to upright position to access adjustment screw.
• Locate adjustment screw. Use Allen key (supplied) to turn screw
clockwise to lower the angle or counterclockwise to raise dash angle.
Adjust handlebar positions so that the handgrips are within comfortable
reach.
• Sit in seat facing forward.
• While holding the handlebar, reach down to the base and loosen the
locking adjustment handle by turning handle counterclockwise.
• When at desired angle, tighten locking handle by turning clockwise.
Note:
Lever can be positioned out of the way by pulling lever out and
moving it away from rider. Release lever and it will lock in place.
7
8
ILLUSTRATIONS 7 & 8 – Dash and Handlebar Positions
