background image

Rascal R600 Scooter Owner’s Manual

EMC Part: 19271200 • Rev. 03 • 06/01/2003

33

3.

Damage caused by:
a.

Battery fluid spillage or leakage.

b. Abuse, misuse, accident or negligence.
c.

Improper operation, maintenance or storage.

d. Commercial use or use other than normal.
e.

Repairs and

/

or modifications made to any part without specific consent from Electric Mobility

Corporation.

f.

Circumstances beyond the control of Electric Mobility Corporation.

4.

Labor, service calls, shipping and other charges incurred for repair of the product unless
specifically authorized by Electric Mobility Corporation except during the first thirty days of
ownership.

There is no other express warranty.

Disclaimer

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, IMPLIED OR EXPRESS,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
ELECTRIC MOBILITY CORPORATION FURTHER DISCLAIMS LIABILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES TO INCLUDE BUT NOT LIMITED TO, PERSONAL INJURY OR
PROPERTY DAMAGE ARISING FROM ANY DEFECT IN THE PRODUCT.

Implied warranties, including those of merchantability and fitness for a particular purpose, are limited
to one year from the date of purchase and to the extent permitted by law.  Any and all implied
warranties are excluded.  This is the exclusive remedy.  Liabilities for consequential damages under
any and all warranties are excluded.

Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion
of limitation of incidental or consequential damages, so the above limitation or exclusion my not apply to
you.

This warranty gives you specific rights and you may also have other rights which vary from state to state.
Please fill out and return the warranty card to Electric Mobility Corporation.  This will aid Electric Mobility
Corporation in providing the best possible Technical and Customer Service.

For warranty service please contact the Electric Mobility Customer Service Department or your
authorized Electric Mobility service center.

USA

For service and parts, our toll-free number is: 

1 (800) 257-7955

Canada

For service and parts, our toll-free number is: 

1 (800) 655-0065

United Kingdom

For service and parts, our toll-free number is: 

01460-258100

Other Countries

Please call 

1-856-468-1000

 for the name and address of distributors in other

countries.

Summary of Contents for Rascal 600C











































Reviews: