Armrest Adjustment
Armrests can be re-positioned or removed when
the scooter is in the folded position for compact
storage (See
Folding & Un-folding the scooter
section in this manual). Ensure that armrests are
rotated and secured in vertical position before
attempting seating (Fig.9).
The height and position of the armrest can be
adjusted by pressing the buttons (Fig.10) for
comfort.
If you require more room in the width of the seat
armrests, then undo the knobs at the rear of the
seat. (Fig.11). Slide the armrests in or out to suit.
Tighten both knobs to clamp. Ensure that the
armrest positions are no further inboard than the
limit line as marked on the armrest tube (Fig.12).
To ensure that the user is sitting centrally, the
armrests should always be adjusted to be
equidistant from the centre of the seat.
Warning!
Always check the armrests are
locked and secured before attempting to get on
or to drive the scooter.
Warning!
Never drive with the armrests down
or with the armrest knobs not fully tightened.
Seat Back
The angle of the seat back is fixed however it can
be folded to allow easy storage and handling. To
fold the seat, hold it by the top edge and push
forward (Fig.13).
10
Rascal Smilie Scooter Owner’s Manual and Service Record
10
11
12
9
13