Folding the Scooter
• The scooter is on a flat, secure ground surface,
with the freewheel lever engaged to ‘Drive’
Position
(Fig.28).
Note: Lever lowest position to
engage ‘Drive’
•
Remove key from tiller-head and remove
charging lead (if connected) from power
socket.
• Loosen tiller-height adjustment knob and set
the tiller height is to minimum, then secure knob
(Fig.29).
Fold the rear sat back down to the flat
position.
•
Locate the fold-lever at the rear right-hand side
of the scooter (
Fig.30
).
•
Take hold of tiller-delta with one-hand, push
tiller-delta in a forward direction simultaneously
when retracting the fold-lever with the other-hand
(Fig.31).
This action will dis-engage fold-lock
mechanism. The scooter mechanism will then
disconnect the internal fold-lock device and then
partially un-fold (Fig.32). The support wheels will then
be in contact with the ground.
17
29
Fold-Lever
28
30
31
9
32
