3
Rasha Professional A/S | 1800 Rustin Ave, Riverside, CA, 92507 | 951-654-3585
Rashaprofessional.com | info@rashaprofessional.com
8. To make sure the light working environment temperature, the highest do not
exceed 40
℃
，
the lowest do not exceed - 20
℃
.
9. Under the stable cooling working situation, the highest temperature of the
housing of the light can reach 80
℃
, please do not touch.
10. The light is design according to the type of electric shock protection. The light
should be use in good connection grounding power system and the earth sign port
of the light should be connected to the installing fixtures.
11. Do not use the damage of the insulating layer wire and also do not use the
power cord overlap on the other wire. When not in use or clean the light, please
disconnect the power, don't pull the plug in hard or just drag the wires.
12. There are no components inside for maintenance. Before start operation the
light, please check whether all of the shell is installed. In the case of the shell open
used the light is prohibited. Note: Under any installation, maintenance and clean the
light, please confirm that has cut off the power cord!
II. Safety Instruction
★
For security reasons and in accordance with the term’s, reassemble or modify the
product is not allowed without permission. Please note that due to human damage caused
by improper use of the product, will break the warranty qualification. Moreover, the
unprofessional operation may lead to short circuits, burns or electric shock, and so on.
★
This device has been full inspection before shipping. For your safety, please operate it
according the User Manual.
★
If any damage caused by improper operation will result in the termination of the
warranty claims. The manufacturer does not accept any responsibility of property damage
due to improper operation or personal injury due to non-compliance with the operating
instructions.
★
Keep the manual in a safe place for future reference as well as after the product sale,
lease, etc..
★
Note: Based on product improvements, specification may change without notice.
Changes in product specifications related rights will be reserved.
