6
Rasha Professional A/S | 1800 Rustin Ave, Riverside, CA, 92507 | 951-654-3585
Rashaprofessional.com | info@rashaprofessional.com
Power Linking
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes.
The Blade controller may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
•
Make sure that the structure onto which you are mounting the product can support
the product’s weight. See the Technical Specifications for weight information.
•
When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
•
When power linking multiple products, mount the products close enough for power
linking cables to reach.
The product provides power linking via the outlet located in the back of the product.
Please see the diagram below for further explanation.
Power Linking Diagram
Mounting
Controller
The Controller is IP20 rated. Keep it away from water, solvents and chemicals.
Take care to site it away from potential water hazards, for example, avoid
installing it where excessive humidity, water splatter or condensation may
occur
Orientation
Mounting Diagram
Blade Controller(Terra)
Rear Keyhole Mounting
Use a level to ensure accuracy
while mounting
