Rasha Professional A/S 1130 Palmyrita Ave. Ste 320, Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
info@rashaprofessional.com
11
• 0-100% mechanical dimming, mechanical dimming and free dimming available.
• strobe macro control available.
• Lens optical system mechanical focus .beam angle 0-4°
• Over heat protection
• Power Input: 100-240V/50/60Hz
• Power Dissipation: 350W
• IP level :IP20
• Magnetic ballast and AC/Dc power supply
• Product Size:523×337×511mm
• Packing Size: 635X440X725
• Net weight: 19.5KG
5.
CABLE CONNECTION (DMX)
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm
characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or
other cable with characteristics differing from those specified. The end connections
must be made using XLR type 3 or 5-pin male/female connectors. A terminating plug
must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W)
between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal
casing of the connectors. The casing itself must be connected to the shield braid
and to pin 1 of the connectors.
Figure DMX Cable connection
DMX512
DMX512
3 Pin
DMX512
5 Pin
1. Screen
2. – Signal
3. +Signal
5
2
3
2
4
2
1
3
1. Screen
2. – Signal
3. +Signal
