Rasha Professional A/S 1
800
Rustin
Ave., Riverside CA, 92507
|
951-654-3585
rashaprofessional.com
|
info@rashaprofessional.com
13
CHAPTER 2 PANEL OPERATION
The light panel diagram is shown below
The Left area is TFT Display, this display supports touch as well as the encoder button
to the right.the tough operation is just like ANY Touch Screen on the market, touching
the item will set or modify your setting.
Note: Prevent damage the touch or TFT displayer, Can not use sharp objects
chick displayer.
Panel diagram
2.
OPERATION
1. Operate light with touch or encoder button
The left area is TFT Displayer and touch, Pess to select or set item and its value with
your finger to complete the operation of seting the light parameters.
The area on the right hand side is rotary encoder with button, As an auxiliary input
interface, if the touch function is disable, the encoder can been used to set or view
the item, and then press the encoder button to confirm the selection, rotary encoder
again set the parameter value, finally, Press encoder button one again to save value or
setting.
2. Parameter value setting
When the selected item is value need to been modified, the dialog shown in Figure will
popup.
Dialog of value setting
ENTER
DOWN
UP
001
apply
1
2
3
4
5
1. Quick Adjust
2. Mirror
3. Apply Value*
4. Adjust Value
5. Save Quit
