Rasha Professional A/S 1
800
Rustin
Ave., Riverside CA, 92507
|
951-654-3585
rashaprofessional.com
|
info@rashaprofessional.com
17
4.
TEST LIGHT
This will put the Fixture into test mode.
The light does not receive the data for DMX controller if placed in test mode
PAN: range for 0 to 255;
TILT: range for 0 to 255;
FOCUS: range for 0 to 255;
COLOR: range for 0 to 255;
GOBO: range for 0 to 255;
PRISM: range for 0 to 255;
FROST: range for 0 to 255;
STROBE: range for 0 to 255;
Test Menu
5.
SET LIGHT RUN PARAMETER (ADVANCE)
To set the parameter of Fixture:
Pan Invert
: Reverse PAN move.
Tilt Invert:
Reverse TILT mover.
P/T rEC:
when this is set as “OFF” PAN or TILT will disable Rectify function.
If this is ‘ON’, when PAN or TILT lose steps, light will rectify auto.
Pan Offset:
Set PAN original position.
Tilt Offset:
Set TILT original position.
Lamp on when:
Select lamp on mode:
1. Power on
2. After reset done
3. Manua
l.
Factory setting:
restore all parameter to factory setting.
Address
WorkMode
Display
Test
Advance
Status
Escape
Pan
000
TILT
000
FOCUS
000
Color
000
GOBO
000
PRISM
000
FROST
000
STROBE
000
