6. Secure the rail components to the rail using the bundled screws.
7.
Press the spring lock (
) then insert the studs into the selected square mounting holes on
the rack post.
8.
Press the spring lock on the other end of rail then insert the stud into the mounting hole on the rack
post. Extend the rack rail, if necessary.
9.
(Optional) Use the rail screw and rail washer (
) that comes with the kit to secure the rack rail
to the rack post.
10.
Perform steps 3 to 5 for the other rack rail.
Ensure that the installed rack rails (left and right) are aligned, secured, and stable in place.
11.
Lift the server chassis and insert into the rack rail.
Ensure that the rack rail cabinet and the rack posts are stable and standing firmly on a level
surface.
