11
1. Completely cover
Burner Pipe
and
Ember Boosters
with the provided Black Volcanic ash (Figure 13) Starting from
rear of Burner Pan and moving toward leading edge. Use entire contents of bag provided, allowing medium to spill
over leading edge of burner pan (Figure 14A).
If using a Propane burner, the Pan Medium used will be Volcanic Ash (Amount supplied will vary with each style
burner).
NEVER
use White Sand inside a propane burner pan.
2. Sprinkle a light covering of “ Ember Magic” over the Black Volcanic Ash. Pull apart “Ember Magic” fiber material
into small, loose pieces to enhance the glowing ember effect. Spread remaining “Ember Magic” around ends of pan
to add to the ember bed appearance. When done the Burner Pan should look somewhat like the illustration below.
FIGURE 13
Ember Boosters
Leading Edge
of Burner Pan
FIGURE 14
Burner Pipe
Black Volcanic
Ash
STEP FIVE: PAN MEDIUM (PROPANE MODELS)
WARNING: Wash hands after handling “Ember Magic” as it may cause skin irritation.
A)
FIGURE 15
