– 30 –
The appliance works under power sharing technology. If both cooking zones are operating simultaneously,
the ceramic cooking zone will stop operation automatically when the power level of induction cooking zone
is set at [8].
Remark:
When using the induction cooking zone, if no suitable cookware placed at the cooking zone,
“Beep” sound will keep emitting even power/temperature control have been set. The power/
temperature level indicator will keep flashing to remind user. The appliance will return to standby
mode automatically if no suitable cookware placed within 1 minute.
Timer setting
After selecting the power/temperature control, press the [ ] key to activate the timer function, display will
show [0:00]. User can drag at the slide control area [ ] to adjust cooking time, and time can be circulating
from 1 minute to 8 hours. When it comes to [0:59], the timer will change to [1:00] if increase the time setting,
meaning that the setting time changed from 59 minutes to 1 hour. To confirm the timer setting, press [ ] key,
the digits in the display will stop flashing. Time will start counting down and remaining time will be shown
on the display. When the count down is finished, the operation will stop after a “Beep“ sound and End will
be shown on the display.
If the setting time is less than 60 minutes, the time adjustment will increase or decrease by 1 minute each
time. More than 1 hour time setting, each adjustment increase or decrease by 10 minutes.
To adjust the setting time, user can press the [ ] key once, digits on the display will flash again and press the
slide control area [ ] to reset the timer. The appliance will confirm automatically 10 seconds after completion
of the setting. Timer function can be cancelled by long pressing the [ ] key or simply press the [ ] key.
Safety lock function
To prevent children accidentally operating the appliance or changing the function modes, press and
hold the [
] key for 2 seconds, buzzer will sound 3 times and safety lock indicator [ ] will light up.
All the function keys are locked (including [
oC
], [
], [
] keys and slide control area [
]), where the
operating modes, power, temperature and time can not be adjusted. During the activation of the safety
lock, the safety lock indicator [ ] with light up on the display.
The lock is deactivated under standby mode. Press and hold the [
] key for 2 seconds, safety lock indicator
will light up on the display, which means all function keys are locked. To deactivate the lock by pressing
and holding the [
] key again for 2 seconds. A "Beep" sound will emit and the appliance is resumed for
operation.
If both [Timer] and [Lock] are activated at the same time, remaining time will still be shown on the display.
All the function keys are locked (except [ ] key). Press and hold the [
] key for 2 seconds to deactivate the
safety lock and resume all the function keys.
If user stop the operation directly by pressing the [ ] key, the safety lock [ ] indicator will still light up. User
must press and hold the [
] key to resume the operation before next operation. If cut off the power supply
directly, the lock will be deactivated and all the function keys will be unlocked when re-connecting the power
again.
Absent-minded shut down protection
When approx. 120 minutes elapses without pressing any key for operation or setting timer during heating,
a “Beep“ sound will be heard and the appliance will be shut off automatically as protection. Use the timer
function if the heating time is longer than 120 minutes.
