Precautions before use
Method of laying electric blanket
1.Please spread out the electric blanket
Plug
concave
convex
Back side
connector
Please spread on the bed .
Do not use under folded state.
Don't put tables, chairs, etc on it.
Please do not use with other heating products
(electric heating carpet, electric heating knee
blanket, foot stove, etc.).
2.Please insert connector
Please connect the convex and concave parts
of the connector to the bottom.
3.Be sure to place the control box outside the blanket.
Be sure to place the control box outside the blanket.
Name of each part and method of use
Method of use
About the timer for forgetting turn off
(Power lamp
Power on start (power indicator light on)
8 hours after automatically stop heating.
When it's used again
Adjust the "power supply and temperature
adjustment" switch to the "off" position
(the power indicator is off), switch on the
power again after 2 seconds, Use when the
power indicator is on.
Flicker at regular intervals)
1. When the power plug is inserted into the
socket, make sure it is inserted into the
root.
2.Set the power/temperature switch to your
preferred position.
The power indicator is on, indicating that the power has been
connected
。
3.After use or when out, turn the power/
temperature switch to the "off" position
and unplug the power plug from the socket.
When unplugging the power plug, be sure to grab the plug.
Name of each part
About the room temperature sensor
When Room temperature has risen due to
use with other heating products,
Automatically control and reduce the
surface temperature of electric blanket to
prevent overheating.
CAUTION
The controller is special for this product.
(there is a label on the back of the
controller) other products shall not be
used.If any confused,contact
Shun Hing
Electric Service Centre LTD
Power/temperature
control switch
temperature sensor
Power lamp
Power plug
Power cord
connector
blanket plug
Body
Controller
Body side power cord
HI
LOW
POWER
OFF
("HI" is the highest
temperature)
