20
6.
Operation Instructions & Ingredient Preparation Precautions
6.1 Operation Instructions
Step 1
Step 2
Step 3
Step 4
Step 5
Place the blade
assembly
into the container
Add
ingredients
into the
container
Close the
container
cover.
*Make sure it
is closed
firmly
Align the main
unit locking slot
with the locking
clip of the
container, and
turn the main unit
clockwise until a
"click" sound and
the indicator light
flashes blue once
to confirm that
the lock is in
place
Turn the main
unit counter
clockwise to
disassemble the
container, then
the indicator
light will flash
once in red.
Take out the
container cover,
and use a
spatula to
remove the
ingredients
1.
Make sure the appliance is fully charged before use.
2.
Clean the container, container cover, blade assembly and spatula.
3.
Place the blade assembly to the driving axis at the middle of the container.
4.
Follow the instructions on
“Chapter 6.2 Ingredient Preparation Precautions”
by putting
appropriate amount of ingredients into the container. Make sure the blade assembly
installed in place.
Attention! The amount of ingredients added must not exceed
“MAX” position!
5.
Close the container cover and place the main unit on top.
CAUTION!
Check if the main
unit, container cover and blade assembly are all properly installed in right position.
6.
Put the main unit on, align the locking slot of the main unit with the locking clip of the
container, and turn the main unit clockwise until a "click" sound and the indicator light
flashes blue once to confirm the lock is in place. Otherwise, the indicator light will flash
once in red if the lock is not successful as a reminder.
7.
Press the button and the appliance will start operating. To stop the operation, just release
the button. Notice! During operation, if the blade assembly gets stuck with ingredients, the
appliance will stop operating, the indicator light keeping flash red, and the user can clean
up the ingredients by spatula and then use it again.
Summary of Contents for RMC-B4/B
Page 25: ...24 備忘錄 ...
