– 14 –
食
物
處
理
器
Mini
Chopper
6. Operation Instructions & Ingredient Preparation for blade
6.1 Operation Instructions
Step 1
Step 2
Step 3
Step 4
Place the blade
assembly into
the container.
Add ingredients
into the
container after
place it on the
anti-slip pad.
Close the
container cover.
(Make sure it is
closed firmly)
Place the main unit on top, align the axis
and blade assembly before connect to
the electricity. Hold the appliance tight
with one hand and press the power
button with the other hand to start the
operation.
1.
Make sure the appliance is not plugged into the socket before use.
2.
Clean the container, container cover and blade assembly.
3.
Place the blade assembly to the driving axis at the middle of the container.
4.
Follow the instructions on “
Chapter 6.1 Ingredient Preparations”
by putting appropriate
amount of ingredients into the container. Make sure the blade assembly installed in place.
Attention! The amount of ingredients added must not exceed “MAX” position!
5.
Close the container cover and place the main unit on top. Check if the main unit, container
cover and blade assembly are all properly installed in right position.
6.
Connect to the electricity, make sure the plug is firmly connected to the socket; otherwise,
the appliance may overheat or damage the power cord due to abnormal heat by poor
contact.
7.
Hold the appliance tight with one hand and press the power button with the other hand,
operation will start. Release the power button to stop the operation.
8.
Do not lift the main unit immediately after the operation. Make sure the rotation of the
blades stopped and unplug the appliance before lifting the main unit.
9.
Open the container cover, take out the blade assembly before pouring out the processed
food.
***
CAUTION! Do not operate the appliance more than 30 seconds once.
It is recommended to
switch off about 2 minutes after operating 30 seconds. Take one trial plus 2 minutes rest as
one cycle, stop operating the appliance after 3 consecutive cycles and leave it unattended
for 15 minutes. Restart the operation after the appliance is completely cool down as not
to cause over-heating.
***
CAUTION!
The appliance is not suitable for handling hard ingredients, such as meat with
bones, frozen food, coffee beans, peppers, ice cubes or sticky foods. Otherwise malfunction
may happen.
Shun Hing Electric 70935(M).indb 14
2020-06-26 16:00:03
