9
HOW TO USE
Control panel
: Press the buttons on the control panel to select functions.
Instructions
1.
Take the unit from the package and remove all packing material.
2.
Insert the plug into a 220V-240V~50-60Hz electrical power supply outlet.
3.
Press the buttons on the control panel as follows:
Press the button to activate or deactivate the oscillation of the
fan.
Press the button to choose Normal (NM), Natural (NT) or Sleep
mode (SL).
Press the button to activate the timer function (0,5h – 8.h). The
selected time will be shown on LED Display. The fan will shut
down automatically when time is up.
Set the desirable fan speed (8 speed). Default is 4. The selected
fan speed will be shown on LED Display.
Press the button to switch the unit on or off.
Display panel
: Blue LED display shows the current room temperature.
Remote control
: All functions performed with the remote control works identically to the
control panel. Use the remote control in front of the unit.
CLEANING AND MAINTENANCE
-
Always unplug the unit before cleaning, moving or servicing.
-
Unplug the unit and wait until the fan stop running before cleaning.
-
Do not immerse the power cord, plug and the whole unit into water or rinse under the
tap.
-
Do not use gasoline, benzene, thinner, poisonous or corrosive detergent to clean the
unit to avoid damage of the appliance.
-
Use a damp cloth to clean the surface of the fan.
-
Unscrew and open rear cover/ guard carefully and take out the filter. You could wash
the filter under running water.
-
Rinse and dry the filter before place back. To avoid unit damage, place the unit on a
