background image

4

EN

ALL RIGHTS ARE RESERVED ACCORDING TO THE

INTERNATIONAL COPYRIGHT CONVENTIONS,

The reproduction of any part of this manual, in any form, is forbidden without the

prior written authorization of Rasor

®

 Elettromeccanica S.r.l.

The content of this guide can be modified without prior notice. Great care has

been taken in collecting and checking the documentation contained in this

manual to make it as complete and comprehensible as possible.

Nothing contained in this manual can be considered as a warranty, either

expressed or implied - including, not in a restrictive way, the suitability warranty

for any special purpose. Nothing contained in this manual can be interpreted as a

modification or confirmation of the terms of any purchase contract.

Rasor

®

 Elettromeccanica S.r.l. machines have not been conceived to work in areas at risk of

explosions and at high risk of fire and they cannot cut wet or damp materials. Moreover,
they cannot work in case of rain.

In case of damage or malfunction, electric scissors DS503MT must not be used until the

Customer Care Technical Service has repaired them.

The original configuration of the electric scissors must not be changed at all.

On receiving the machine make sure the supply corresponds to what has been ordered.

In case of non-compliance immediately inform Rasor

®

.

Also make sure the scissors have not been damaged during transport.

Customer Care Technical Service

WARNING

The installer and the maintenance man must know the content of this manual. Although

the main features of the machine described in this manual are not subject to change,

Rasor

®

 Elettromeccanica S.r.l

. reserves the right to modify the components, details

and accessories it deems necessary to improve the machine or to meet manufacturing or
commercial requirements at any time and without being obliged to update this manual

immediately.

Informative letter

For any information, please contact

RASOR

®

ELETTROMECCANICA

 

S.r.l.

Via V. Caldesi, 6; 20161, MILANO (MI) - ITALY

Phone: +39.02.66221231; Fax: +39.02.66221293

e-mail: info@rasor-cutters.com

web: www.rasor-cutters.com

WARNING

Summary of Contents for DS503MT
















Reviews: