EN
5
2
2
1
1
Numero di matricola
Anno di produzione
Modello
Dati
motore
3
2. TRANSPORT AND PACKING
The pneumatic scissors are delivered in a cardboard box, inside which there are various
options. The code of the ordered product and its serial number are indicated outside the
package (see picture 1). The following accessories are contained in a bag inside the package:
1) Heptagonal blade (7 sides);
2) Hexagonal wrench for grinding wheel nut tightening;
3) Grease tube;
4) Butterfly key for blade nut disassembly;
5) Drift for blade disassembly.
3. PLATE DATA
The manufacturer's identification and 2006/42/EC STANDARD conformity plate (see picture
below) is located on the front part of the pneumatic scissors.
The plate must not be removed at all, even if the machine is resold. Always refer to the serial
number (written on the plate itself) when contacting the manufacturer.
Several safety warnings are printed on a card which is applied to the scissors feeding cable;
such warnings must be strictly followed by everyone dealing with the machine. The company
is not to be held responsible for damage to property or accidents to people which might
occur if the above-mentioned warnings are not observed. In such a case, the operator is the
only person responsible.
READ THE INSTRUCT ION MANUAL
USE METAL GLOVES
USE GOGGLES
SHEARING RISK
DO NOT REMOVE THE SAFETY
DEVICES
