EN
5
2. TRANSPORT AND PACKING
The cutting unit is delivered in a carrying case, inside which there are various options. The
code of the ordered product and its serial number are indicated outside the package (see
picture 1). The following accessories are contained in a bag inside the package:
1)
Poligonal blade;
2)
Butterfly wrench for blade nut disassembly;
3)
Drift for blade disassembly.
3. PLATE DATA
The manufacturer's identification and EC STANDARD 2006/42/EC conformity plate (see picture
below) is located on the front part of the cutting unit.
The plate must not be removed at all, even if the machine is resold. Always refer to
the serial number written on the plate itself when contacting the manufacturer.
Several safety warnings are printed on a card which is applied to the cutting unit feeding
cable; such warnings must be strictly followed by everyone dealing with the machine.
The
company is not to be held responsible for damage to property or accidents to
people which might occur if the above-mentioned warnings are not observed. In
such a case, the operator is the only person responsible.
READ
T H E
INSTRUCTION
MANUAL
DO NOT
REMOVE
T H E
SAFET Y
DEVICES
HIGH
VOLTAGE
SHEARING
RISK
US E
METAL
GLOVES
US E
GOGGLES
1
Serial number
Year of production
Model
Electric data
2
2
1
3
GRT12SM
180
SM_______
0,52
400
2___
