6
EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a cutting unit model GRT12SM which can be assembled
on automatic machines (e.g. spreaders, computerized cutting) by means of proper holes
located in the motor support. GRT12SM can operate continuously and it can cut at various
heights by means of multiple installation.
By cutting with the blade and the counterblade always in contact and thanks to the steel
upper quality of the blade supplied, GRT12SM guarantees the clean separation without frayings
of the two borders of the cut material. Thanks to the use of an effective cutting system with a
poligonal blade, it is possible to use the cutting unit to cut profiles not only in the textile and
tannage sector, but also in several industrial sectors such as to cut polymers, thermoacoustic insulators,
padding, neoprene, filters, synthetic fabrics and similar fabrics, moquette and internal parts of cars
and ships, glass and carbon fibres. The three-phase motor with extremely compact dimensions
and extreme reliability with 120 mm diameter blades, guarantees cuts with thickness up to
5 cm. A sharpener assembled on the cutting unit head allows whetting the blade at any
moment without disassembling it. After carrying out this operation, it is possible to start
cutting again. A high power motor, perfectly balanced, with a high number of revolutions
and almost free of maintenance, reduces the vibrations to the minimum, thus making the
cutting unit complies with European Directive No. 2002/44/EC concerning the risks deriving
from mechanical vibrations.The mechanical parts are made of high resistance steel, bronze and
aluminium and require lubrication after several working hours.
1
2
3
6
7
5
8
4
9
11
10
12
1
Connector block
7
Aluminium base covered with
Teflon
®
2
Motor cover
8
Poligonal blade
3
Motor frame
9
Greaser
4
Sharpening button
10
Motor flange with assembly
holes
5
Motor support
11
Hard metal counterblade
6
Movable front protection
12
Structure
Device components
