19. MDBCashlessInit
GUI command
Command
Parameters/Comments
MDBCashlessInit(N)
“N” is the address of the cashless to be initialized (1 for the first
cashless device and 2 for the second cashless device)
RASPIVEND daemon answer
Answer
Parameters/Comments
{"MDBCashlessInit":"success"}
or
{"MDBCashlessInit":"failed"}
This command will perform all initialization tasks for the attached
MDB cashless system. If something goes wrong or the MDB
cashless system is not connected to the board, then the
command returns “failed” message.
20. MDBCashlessEnable
GUI command
Command
Parameters/Comments
MDBCashlessEnable(N)
“N” is the address of the cashless to be enabled (1 for the first
cashless device and 2 for the second cashless device)
RASPIVEND daemon answer
Answer
Parameters/Comments
{"MDBCashlessEnable":"success"}
or
{"MDBCashlessEnable":"failed"}
This command will activate the attached MDB cashless system.
This command must be preceded by the MDBCashlessInit
command. You cannot activate a cashless system if this one is
not initialized.
21. MDBCashlessDisable
GUI command
Command
Parameters/Comments
MDBCashlessDisable(N)
“N” is the address of the cashless to be disabled (1 for the first
cashless device and 2 for the second cashless device)
RASPIVEND daemon answer
Answer
Parameters/Comments
{"MDBCashlessDisable":"success"}
or
{"MDBCashlessDisable":"failed"}
This command will deactivate the attached MDB cashless
system.
© 2016 – AUTOMATROM SRL – www.vendingtools.ro
