Put the storage battery into the
battery compartment. Plug the
interface to the jack connect the
red terminal and the black
terminal respectively to the
anode andcathode of battery.
(Notice: make sure they are
correctly connected
,
red to red
，
black to black, otherwise, it will
cause short-circuit.)
Install the battery locker(7) to the
designated position, and fix it
with 2 screws(4)
Install the battery cover(8) to the
designated position, and fix it
with 2 screws(4)
Put the seat (3) to the designated
position, fix the front buckles of seat
to the grooves of car body.
Press down the button behind the
seat and lay down the seat, then
release the button and the seat
will be locked. To unlock the seat,
press down the button and raise
the seat.
Notice: This seat is equipped with
seat belt, which is only a decoration
to develop the safety sense of
children, it can not provide any
substantial protection.
Replace or take out the storage
battery and power.
Loosen the 2 screws(4) on battery
cover(8)
Unplug the interface and jack,
loosen the 2 screws(4) on battery
locker(7), then the storage battery
can be taken out.
1.Install battery and power
supply
2.lnstall seat
ASSEMBLY
Jack
Interface
