Overcurrent protector is installed under
the seat.
Motherboard is equipped with automatic
recovery fuse. When it is overloaded or
improper used, disabling the motor, the
fuse will automatically disconnect the
power.
To reset, just turn off the key switch and
wait 30 seconds, the fuse will automatically
recovered.
Power device is equipped with blown
fuze. When short-circuit happens, the
fuze will be blown. Therefore, after
solve the circuit problem, you need to
replace the blown fuze.
Transmitting signal can cover about
20-30meters across. If transmitter
does not perform properly within this
coverage, please check its battery.
Install the batteries and turn on the
controller, when the indicator light
starts flashing, it is ready to match
frequency. Then turn on the
Ride-on car, when the indicator
light
turns
off,
matching
is
complete.
Remark: in order to protect the
motor, the power of left/right button on
the transmitter will be cut off if you press
left/right button for over 2 seconds.
Therefore, a continuous turning will
require you to press left/right button
repeatedly.
Switch: switch of controlling horn
Horn:Horn sound can be activated
when press.
1.Transmitter
2.Steering wheel
Right
Left
Forward
Reverse
brake
OVERCURRENT PROTECTOR
OPERATING FUNCTION
Blown
fuze
Switch
Horn
