Ratek OM8 Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 5 of 15
Operator Responsibility – Safety Considerations
When operated in strict accordance with this User Manual, plus routine cleaning and maintenance being carried out, the product shall provide safe
operation for the operator. The operator should be aware of the following before installing and operating the product:
Conditions of Operation
*Note:
The term “Operator” referred to in this User Manual is the primary person who has been tasked to install, maintain and train in the
usage of this equipment. Other personnel shall be referred to as “Users”.
•
The operator shall be aware that the protection provided by the equipment may be impaired if the equipment is used with accessories
not provided or recommended by the manufacturer, is modified in any way or is used in a manner not specified by the manufacturer.
•
The operator is responsible for ensuring all users of the product are qualified to do so, and are well versed in common safety
concepts. The product should only be operated by an adult who has read and understood this User Manual provided in the appropriate
language in its entirety.
•
Any user must be informed by the responsible operator of any potential hazards that may arise through the use of this equipment in
the course of their work, including any local environmental hazards not related directly to the Orbital Shaker. They should also be able
to demonstrate that they understand any preventative safety measures in operation prior to operating the equipment.
•
The operator shall agree to accept responsibility for the use of the equipment in accordance with this User Manual, and be fully aware
that the equipment is designed for commercial use.
•
It is assumed that the user and operator have had experience in a commercial environment, and had appropriate training in how to
perform their work safely in accordance with any local operational health and safety regulations. The operator and all users should be
well versed in local emergency procedures as per the workplace safety regulations in effect.
•
Avoid any direct impact with any surface of the equipment, including the casing, disc and most importantly the control panel.
•
Important:
Do not use any sharp or pointed metal objects anywhere near the equipment, in particular the control panel.
•
Avoid using the equipment near any other vibrating equipment or source of excessive vibration.
•
Ensure the equipment is cleaned and maintained in accordance with this User Manual.
•
Ensure that all original safety warning labels are in an adequate, legible condition and are firmly affixed to the equipment before using
the product.
•
Plug the equipment directly into a wall power outlet. Do not plug the equipment into a multi-socket adapter of any kind.
•
The equipment is intended for operation in a controlled electromagnetic environment. Avoid the use of transmitting devices (e.g.
cellular or mobile telephones) near the equipment whilst operating. A minimum distance of 2 Metres from the product is
recommended for any transmitting device.
•
The equipment must only be installed and operated in well ventilated areas. The unit is not intended for use in explosive atmospheres
or in confined spaces.
•
The allowed operating environment must be between 5° Celsius and 40° Celsius ambient air temperature.
•
The maximum allowed relative humidity of the operating environment is 80%.
•
The equipment should not be stored in direct sunlight, near chemicals, or other contaminants.
•
If any of these safety recommendations cannot be achieved or the equipment has been damaged in any way, the equipment should not
be installed or operated.
•
Important:
If you have any concerns or questions relating to operator or user safety, please contact the appropriate Ratek Service
department before installing and operating the unit. Contact details are provided in this User Manual.
