Ratek OM8 Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 7 of 15
Safety Warnings
Throughout this User Manual, specific warnings will be supplied which relate to the current operation being referred to. These warnings are supplied
in addition to the main warning labels affixed to the product and the key points outlined in the section of this User Manual titled ‘Operator
Responsibility – Safety Considerations’.
A graphical symbol as pictured below will be used next to each warning with accompanying text; the danger level for each is described below:
CAUTION
Indicates a possibly highly dangerous situation which may result in serious injury or threat to life if the situation is not avoided.
CAUTION
Indicates a possibly harmful situation which may result in injury or damage to product or property if the situation is not avoided.
Safety Recommendations
The following safety recommendations must be followed to prevent damage or injury. In addition to these safety recommendations, it is assumed that
the user and operator have had experience in a commercial environment, and had appropriate training in how to perform their work safely in
accordance with any local operational health and safety regulations. The operator and all users should be well versed in local emergency procedures
as per the workplace safety regulations in effect.
CAUTION
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be
impaired.
CAUTION
The equipment must only be used with a protective earth power socket. The earth contact provides protection to the user and
the equipment. If you do not have a protective earth power socket, or you are unsure as to whether you have a protective
earth power socket,
do not
connect the equipment. In such cases you should consult your workplace administrator or electrical
maintenance staff to determine if a protective earth power socket is available.
A surge protected power outlet is strongly recommended as it provides some protection for the equipment in areas of
poor electrical quality as well as providing some protection against lightning strikes. The equipment should be
operated on a good, reliable supply of power at all times.
Note: The Orbital Shaker should not be operated on the same electrical circuit as other high voltage household appliances such
as fridges, clothes dryers, washing machines or other continuous operation high voltage devices. These types of devices can
create power fluctuations that are undesirable for electrically sensitive equipment. Consult your workplace administrator or
electrical maintenance staff if you are unsure.
-
ALWAYS
wear protective eyewear when working with the equipment.
-
ALWAYS
place the Orbital Shaker on a strong, even, dry, flat, smooth surface to allow the rubber feet to hold the mixer
securely.
-
ALWAYS
turn off power before moving the equipment to a new location.
-
ALWAYS
turn off the mains power supply at the outlet when the unit is not in operation.
-
ALWAYS
be careful of water or other liquids near the working area and ensure any spills cannot come in contact with the
Orbital Shaker control panel or mains power lead. Ensure benches are kept dry at all times.
-
ALWAYS
operate the Orbital Shaker in a well ventilated area with adequate clearance around the Orbital Shaker as
indicated in case of spillage.
-
ALWAYS
use only the original mains power lead. Replacement non-genuine leads may not be suitable.
-
ALWAYS ensure the equipment is included in your electrical test and tag register.
-
NEVER operate the equipment if the electrical test tag is out of date.
-
NEVER
operate the equipment if you believe it is damaged in any way.
-
NEVER
operate the Orbital Shaker if the mains power supply cable is damaged in any way
-
NEVER
use any sharp or metal objects near the Orbital Shaker control panel
