background image

Installation:

1.

Locate the SIM card slot on the side of the 2100-GSMLC4. Insert the SIM card into the slot. The gold 

    contact side faces down and the chamfered corner edge goes in first. Use a small flat head screw
    driver to push in on the SIM card until it “clicks” into place. 
    

Note:

 Do NOT use a SIM card adapter to install nano sized SIMs into the 2100-GSMLC4. The adapter 

    edge can catch and cause permanent damage.

2.

 Screw the provided dual-band antenna into “CELL 1” port on the 2100-GSMLC4. Antenna should be 

    mounted in an area that allows for a strong cellular signal.
    

Note:

 The phone jack on this device supports a distance of up to 1,000 feet. If a stronger cellular

    signal is required, this device can be remotely mounted up to 1,000 feet away from a RATH® 2100
    series phone.

3.

 Screw the provided flat GPS antenna in the “GPS” port on the 2100-GSMLC4. 

    

Note:

If installing multiple 2100-GSMLC4s, antennas must be mounted at least 3 feet apart.

4.

 Using the provided plug-in transformer, plug the barrel side into the power connector on the 

    2100-GSMLC4. Plug the other end into a 120vac battery backed-up power source.

5.

 Allow at least 3 minutes for unit to fully boot. When the unit is fully booted and connected to a cellular 

    network, the status lights should be as follows:

    POWER 

= Solid Red

    STATUS 

= Rapid Flashing Green

    CELL

= Blinking Green

    GPS

 = Green

    SIGNAL STRENGTH BARS 

= At least 2 or more bars illuminated

    Note:

 If CELL light remains red, it is usually an indication of a poor antenna connection or a problem 

    with the activation on the cellular network. Verify that the SIM card is properly installed and that it has 
    valid activation with a GSM carrier.

2100-GSMLC4 (Supports Communication Failure)

Items Needed:

Not Provided

• 4G LTE based micro SIM card (15mm x 12mm)
• 120vac battery backed-up power source
  (RATH® RP7700107)
• RATH® 2100 series phone

Provided

• Dual-band antenna with 10’ cable
• 12vdc plug-in transformer
• Secondary GPS antenna

N56W24720 N. Corporate Circle  •  Sussex, WI 53089

800-451-1460  •  www.rathcommunications.com

Made in the USA

3 Year Warranty

RP8500GSM4

Ver. 2

03/20

2100-GSMLC4 (Back)

RATH® Cellular Gateway

Dual-Band 

Antenna

Part #: 

2100-GSMLC4

Dimensions: 

6.5" H x 5.2" W x 1.2" D

Weight: 

13 oz

Reviews: