Items Needed
1. On the cellular modem, slide the SIM drawer open and insert the SIM card from designated cellular provider into
the cellular interface
2. Attach mounting brackets to the back of the unit using provided hardware
3. Drill a 7/8” hole in appropriate location for data and telephone wiring
4. Make a slit in the provided grommet and insert into the 7/8” hole
5. Screw one antenna to the MAIN port and the other to the AUX port on the cellular modem
6. Connect the power cable coming out of the enclosure to a standard 110vac wall outlet or RATH
®
RP7700104
Page 3
Installation
• RATH
®
2100 series phone
• PC with network interface card
• Battery backed up 120v power source or RATH
®
RP7700104
• Standard size (25mm x 15mm) data only SIM card
• Active account with an Internet Telephony Service Provider (ITSP) or IP based phone system
• Name, Authentication Password, and Authentication ID for SIP Extension (from ITSP)
• Standard analog telephone
• Ethernet cable
IP Interface Set-Up
1. Set PC to DHCP (Obtain an IP Address Automatically) and connect PC to any open Ethernet port on the switch
inside of the 2100-VOIPLCC using a standard Ethernet Cable.
2. Turn off wireless card on computer (if applicable)
3. Connect analog phone to Phone 1 port on the IP Interface
a. Lift handset of analog phone
b. Dial
* , * , * , *
to enter menu
c. Dial
1 , 1 , 0, #
to have IP Interface playback current IP address (please write down for reference)
d. Hang up analog phone
4. Log into IP Interface
a. Enter IP address played back from IP Interface into a web browser (Google Chrome or Mozilla Firefox
is preferred)
b. Log into Interface
LOGIN:
admin
PASSWORD:
admin
5. Enter SIP Server information into IP Interface
a. In the
Quick Setup
tab all information will be entered into the
Line 1
section
b. Enter SIP Server IP Address or web address in
Proxy
box
c. Enter desired name of device in
Display Name
box
d. Enter Authentication ID into
User ID
box
Note:
For some ITSPs (Flowroute),
User ID is DID number for account.
e. Enter Authentication Password into
Password
box
f. Click
Submit
at the bottom of the page (until will automatically reboot)
