6. After waiting 30 seconds for unit to reboot, click
Voice
tab
a. Scroll down to
Subscriber Information
b. Next to
Use Auth ID
change the drop down to
Yes
c. Enter Authentication ID from ITSP in
Auth ID
d. Click
Submit
at the bottom of the page (until will automatically reboot)
7. After waiting 30 seconds for unit to reboot, click
Voice
tab
8. Click
Line
1 from left-side menu
9. If all information is entered correctly, unit should show
“Registered”
next to Registration State
10. Place a test call using the analog telephone. If test call is successful, disconnect analog telephone and connect
RATH® 2100 Series to LINE 1 port.
Page 4
