Page 7
Turning Ringer On/Off
2300-614GSM4, 2300-614VER4
1.
Open door on unit and remove 4 screws securing the red internal plate. Lift
the plate out and flip it over to expose the keypad.
2
. Above and slightly underneath the keypad will be a small dipswitch labeled
“ON” and “OFF”. Slide dipswitch to “ON” to enable the ringer or “OFF” to
disable the ringer.
3.
Screw internal plate back into place and shut the door on the unit.
970GSM4, 2100-986GSM4, 970VER4, 2100-986VER4
These models do not have ringer option. When unit is called, it will auto-answer and allow for two-way
communication instantly.
LOW COVERAGE
MEDIUM COVERAGE
LED COLORS
OPTIMAL COVERAGE
Minimum
Signal Strength
for Operation
Appendix
RUN LED FLASHES GREEN
POWER SUPPLY IS OK
BAT LED IS ALWAYS ON
BATTERY IS OK
SIM LED IS AMBER
DEVICE IS CONNECTED TO THE NETWORK
COVERAGE LED IS GREEN OR AMBER
GOOD COVERAGE
SLIC LED IS GREEN
DEVICE IS IN STANDBY
Figure 1: Signal Strength Chart
Figure 2: LED Indication Chart
