20
8
Check security of all handlebar stem fixings and
clamps
Adjust to suit customer
preferences
9
Check front and rear mudguards for security and
clearance from tyres
10
Check all cables are clipped securely and safely
Check motor cable cannot rub
against the tyre
12
Check pedals have been fitted correctly and tightened
fully
Note left and right hand
threads
13
Check pedal cranks have been tightened fully on
bottom bracket axle.
Tighten to torque setting in
user and service manual
14
Check smoothness and running clearance of bottom
bracket
15
Check seat post quick release clamp is properly in
place and secure and saddle is correctly fitted.
Adjust as necessary
16
Check smooth operation of gear change on either
derailleur or hub gear and ensure all gears can be
selected
Adjust as necessary
17
Ensure side stand supports bike correctly and does
not interfere with other moving cycle parts
18
Ensure motor wheel turns smoothly and quietly when
rotated by hand in forward and reverse direction
Some additional resistance will
be felt when rotated in reverse
19
Ensure correct chain tension
20
Ensure chain guard is not rubbing on models
equipped with guard
21
Ensure all reflectors are in place on pedals, wheels
etc.
Electrical Parts
1
Fit and check correct operation of front and rear
lights
2
Check connections for installed components
3
Check throttle returns smoothly to closed position
Adjust if necessary
