32
OPERATING
INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for dry sanding of
wood, plastic, metal and filler material as well
as painted surfaces. Machines with electronic
control are also suitable for polishing.
1. FITTING THE SANDING PAPER (SEE FIG
A, B)
FIT THE SANDING PAPER
This sander features an easy hook and loop
accessory fastening system for quick changing
without clamps.
The sanding papers are placed directly onto the
base plate. The hole pattern in the base plate
and sanding paper must match. Then press
the sanding paper onto the base plate by hand.
Firmly press the power tool with the sanding
paper against a flat surface and briefly switch the
power tool on. This provides for good adhesion
and prevents premature wear
Before placing on the sanding paper, free the
base plate from dust/debris by lightly tapping
against it.
REMOVE THE SANDING PAPER
Simply remove the sanding paper directly.
A
B
2. INSTALLING THE AUXILIARY HANDLE
(SEE FIG. C)
For your personal safety we recommend using
the auxiliary handle at all times.
To adjust the handle, release the Auxiliary handle
locking knob and rotate the handle to the most
comfortable and balanced position. Then press
the Auxiliary handle locking knob.
C
3. CYCLONE DUST COLLECTION BOX (SEE
FIG. D1-D3)
A) ATTACH THE CYCLONIC DUST BOX
Your sander is equipped with a cyclonic dust box.
To attach, slide the box onto the outlet piece and
take care that the latching lever engages.
Caution: To prevent the possibility of
sanding dust or foreign body being thrown
into your face or eyes, never attempt to use
your sander without the dust box properly
installed.
B) EMPTY THE CYCLONIC DUST BOX (See
Fig D1 D2)
For more efficient operation, empty the cyclonic
dust box every 5-10mins. This will permit the air
to flow through the box better.
To empty the box, press the latching lever in and
pull off the box. Then press the button at the rear
of the box to open it, and shake out dust.
D1
D2
D3
Summary of Contents for LR400NM
