68
8. Troubleshooting
8-1-2. Deleting the CB32U driver on Windows NT4.0
If you failed to install the CB32U driver and want to re-install it from the start, delete it first.
Follow the steps through to delele the CB32U driver completely.
1. Remove the CB32U from the SCSI Adapters.
a. Open [SCSI Adapters] in the [Control Panel].
b. Click the Drivers tab.
c.
Select the [SCSI CardBus PC Card REX CB32].
d. Click the Remove button to remove it from the SCSI Adapters.
2. Remove the driver file and INF file.
a. Double-click the My Computer icon.
b. Select Options in the View menu and click the View tab.
c.
Check the Show all files.
d. Select Find - Files or Folders on the start menu.
e. Type REXCB32.SYS in the Named box.
f.
Select the drive letter where Windows NT4.0 is installed in the Look in box.
g. Click the Find Now button.
h. If REXCB32.SYS appears, select it and press the Delete key.
i.
Type OEM*.INF in the Named box.
j.
Select the drive letter where Windows NT4.0 is installed in the Look in box.
k. Click the Find Now button.
l. Many files may appear. Choose OEM*.INF files(* is a number) and open these files to see their
content. If you can find a string of CB32, select it and press the Delete key.
Then, you have to delete OEM*.PNF file(* of OEM*.INF and * of OEM*.PNF are the same
number)
