12
4-2.How to use FireDock on Macintosh
(1)How to turn on FireDock
In any order, you can connect a 1394 cable or turn on FireDock, key switch.
Follow the steps to exchage a HDD.
(2-1)When you exchange one HDD, follow the steps:
(2)How to exchange a HDD
(2-2)When you exchange two HDDs, follow the steps:
Move the icon to the Trash
Unlock the key switch
Wait for about 5 sec
Mount automatically
a
b
c
d
e
f
g
Exchange the HDD
Lock the key switch
Finish
a)Move the icon to the Trash
c)d)Exchange the HDD
b)Unlock
(NOTE)
1.If you exchange the two HDDs in the FR-DK2, you have to follow the
procedure as described above. If you move both of the two icon to the
Trash at the same time and unlock both of the key switches, the other
HDD icon will mount again.
2.If the HDD icon fails to mount, unlock the key switch. Then, turn off the
power switch and remove the 1394 cable and reconnect it, turn on the
power switch, lock the key switch.
Move the A icon to the Trash
a)Move the A icon to the Trash
c)Move the B icon to the Trash
A icon: The upper HDD icon
B icon: The lower HDD icon
b)Unlock
d)Unlock
c)d)Exchange the HDDs
Unlock the upper key switch
Move the B icon to the Trash
Unlock the lower key switch
Wait for about 5 sec
Exchange the HDDs
Lock the upper key switch
Lock the upper key switch
Finish
a
b
c
d
e
f
g
h
i
j
Mount automatically
