RAL-KEB02iP (USB_DAC Mode) User's Guide Rev 2.00_L 01/Nov./2015
10
(4). Mode Select Slide Switch
Use this slide switch to change KEB02iP operation mode. This switch must be set in
Power_OFF state, Volume Knob at the front panel must be set at 7'Oclock position. And
the Volume Knob must be turned clockwise to enable operation mode being selected
by current setting of this switch for iPod Legacy Support mode or USB_DAC mode.
-
iPod position(Left) :
iPod Legacy Support mode.
KEB02iP works as an USB Host and iPod/ iPhone/iPad works as an USB Device. Must
be set this position before turning Power_ON KEB02iP to use this mode.