background image

RAL-KEB02iP (USB_DAC Mode) User's Guide Rev 2.00_L    01/Nov./2015

  

 

1. Introduction 

Thank you for purchasing RAL-KEB02iP portable USB_DAC. We are confident that 

you will enjoy listening Hi-Res music at anywhere, outdoors and in home with your PC 
audio system, Mac Book, iPhone, iPad, iPod and WALKMAN. RAL-KEB02iP receives  
High-Resolution digital audio data stream. KEB02iP accepts LPCM format up to 
24bit/384kHz from 16bit/44.1kHz and DoP(DSD over PCM Standard 1.1 compatible) 
format DSD digital music stream up to DSD11.2MHz. KEB02iP passes the DSD stream 
to DSD Direct enabled DAC (ESS ES9018K2M) and creates clear and natural sound. 
RAL-KEB02iP 2.0L version is fully compatible with iOS USB Host mode Audio. The Host 
mode enables Lightning Direct connection and playing back High-Res and DSD native 
music with KEB02iP USB DAC mode. KEB02iP works with popular Music Players, such 
as Audirvana Plus on MacOS X, foobar2000 with foo_asio_dsd, JRiver Music Center , 
HQPlayer and JPLAY on Windows PC and music AP, ONKYO HF Player on iOS devices. 

 

*1) USB Audio Class 2 Driver for Windows must be downloaded from our site below and   
      installed prior to use RAL-KEB02ip with Windows PC. 
   download from 

www.ratocaudiolab.com/download/driver.htm

 

      *** Note) USB Audio Class 2 Driver was updated on 10/Feb./2016. 
            to support Windows10/Windows 8.x/Windows 7.  
*2)RAL-KEB02iP has two operation mode, iPod Compatible mode and USB_DAC   
      Compatible mode. These two modes are switchable with slide switch at the front panel   
      before turning on Power Switch. Refer 

iPod Compatible Mode User's Guide

 to use   

   KEB02iP with iPod/iPhone/iPad and iOS USB Device Audio mode. 
*3)To use iOS USB Host mode Audio, you must set KEB02iP USB_DAC mode and use   
      Lightning to mini-B cable to connect iOS device and KEB02iP.    Also iAP such as   
      ONKYO HF Player is required to play back High-Res format music or DSD format   
   music. 
 

        *** "Apple", "iPod","iPhone","iPad" and "iOS" are the Registered Trade Mark of Apple, Inc. in USA   

        or other countries. 

    **** "RAL" is the Registered Trade Mark of RATOC Systems, Inc. in USA and Japan. "REX" 

        is the Trade Mark of RICHO Corporation in Japan. RATOC has the license to use it for   

        RATOC's products. 

        ***** "ES9018K2M" and "SABRE32" are Registered Trade Mark of ESS Technology, Inc in USA.

 

 

 

Summary of Contents for RAL-KEB02iP






























Reviews: