Set Parameters
Long press
+
will enter the parameter-setting interface. Parameters that can be set include,
Wheel diameter (in: inches), number of magnetic steel, liquid crystal brightness, low pressure points,
etc.(see settings: P01-P20)
.
Under Settings Interface
，
Can be short press
or
Set the value to perform a minimum-
precision unit value operation
，
you can also long press
or
Continuous Fast Modify
Parameters
：
Short press
Switch to Next Parameter
；
Exit settings and save parameters. If not operated, the
modified parameters will automatically exit and be saved after 8 seconds.
Note: Due to company product upgrades, product content will differ
from specifications, but will not affect your normal use.
