Password Disable/Enable/Change
To change power-on password enable/disable settings, press the “+” or the “-” button to select.
Disable means not require a power-on password. Enable means a
power-on password is required.
If select Enable
，
press the
“
i
”
button and then access power-on password modify interface, otherwise
exit the power-on password settings interface.
The default value is Enable Password.
Password Modify
When the display shows Password Set
，
Enter Password 0000, to set new power-on password, press
the
“
+
”
or the
“
-
”
button to modify the value and then press the
“
i
”
button to confirm digit one by one
until the new 4-digit password is completed.
To store the new power-on password, hold the “i ” button for 2s and then exit settings.
When switching the E-bike system on next time, the display will show Password interface, please input
the new password to power on.
