PART 4
Riding instructions
Before riding the bike [some notes about the battery]
Please check the battery status before you ride the bike, make sure the battery full charged,
do not use the battery in low energy, it will kill the battery.
It is the best to use PAS when starting and climbing in order that the better energy economized.
In order to protect the electrical components, please starting in low speed.
Please charge the battery once finished the riding.
If long time no use the battery, it should be charge one time per month at least to keep the
battery alive.
Using of the battery groups
Daily recharging of the battery groups
Daily recharging of the battery groups
Connect the charger to the 110V AC input, the charging indicating light shows red, said it is charging.
When the battery is full, the charging indicating light changes from red to green or red and green flashes.
The charging time takes about 5 hours, After the battery is full charged, the charger will still charge in
a small balanced current.
If you can keep 1 to 2 hours of balanced charging, this will help the battery within the battery groups to
achieve a balanced coherent state.
Battery charging can be performed on the bicycle or remove the battery to do the charging.
When the battery can be full of power to deposit, which is conducive to use at any time.
Battery groups charging for the first time
After buying the battery, user’s need to charge the battery fully for 1-3 times, That is :when charging is
completed (the light from red turns into green),continue a balanced charge for the 3-5hours,the charging
time of about 8-10 hours, this will fully activate each battery within the battery groups to achieve the
best results.
When the battery is in storage for a long time (more than one month), it needs to be recharged fully for
1-3 times, operating as mentioned above
Connection between the battery groups and the bicycle
Firstly, put the battery into the battery slot of the bicycle smoothly and lock the battery.
Connecting the battery discharging port and the electrical wire terminal of the bicycle, and insure that
the connection is reliable.
Opening the discharging switch or the key, the battery groups will start working.
Reversing polar connection can damage the battery device or equipment, or even be dangerous.
Notes
The battery groups should be used in conjunction with the special charger.
