Sub-menu
Meaning
Description
Simulated speed
Pre-configuration for spreading
with simulated speed in order to
spread directly from the edge of
the field
The simulated speed is active
until the actual driving speed has
been reached or after the
simulation time that has been
entered has elapsed.
To be entered in a separate
input window
Sim. duration (s)
Input of the maximum duration
of the simulated speed in
seconds
To be entered in a separate
input window
+/- appl. rate (%)
Pre-setting the application rate
change for the different
spreading types
To be entered in a separate
input window
Set sections
No function
Tractor (km/h)
Determining or calibrating the
speed signal
4.6.3 Forward speed calibration
4.6.1
AUTO/MAN mode
The machine control unit automatically adjusts the metering quantity according to the speed signal.
This adjustment is influenced by the application rate, working width, and flow factor.
By default, the unit is operated in the
automatic
mode.
You only work in
manual
mode in the following cases:
•
If there is no speed signal (radar or wheel sensor not available or defective)
•
Application of slug pellets or seeds (fine seeds)
For uniform spreading of the spreading material, a
constant forward speed
must be applied in
manual operating mode.
Spreading in different operating modes is described in
Menu
Meaning
Description
AUTO km/h
Selecting automatic mode
4. Operation
32
5903001
AERO ISOBUS
Summary of Contents for AERO ISOBUS
Page 16: ...2 3 Structural menu overview 2 Layout and function 16 5903001 AERO ISOBUS...
Page 65: ......
Page 66: ......
