u
Close the metering slide.
u
When determining the maximum admissible load, observe the specific weight of the spreading
material (kg/l).
w
The weight of the spreading material depends on the type of the spreading material (e.g., grit,
sand, fertilizer) and its condition (dry, damp).
u
Only
fill the machine when it is attached to the tractor. Make sure that the tractor is standing on
level and solid ground.
u
Secure the tractor against moving. Apply the handbrake.
u
Switch off the tractor engine and remove the ignition key.
u
Fill the machine with auxiliary equipment (e.g., front-end loader, screw conveyor, silo).
u
When manually filling it (e.g., loading it with big bags), use suitable steps.
u
Maximally fill the machine up to the edge.
The machine is filled.
7. Commissioning
SA 121
5901026
49
Summary of Contents for SA 121
Page 6: ...Table of contents 6 5901026 SA 121...
Page 90: ......
