background image

www.rauckmanutility.com

Doc. No. RUPMP3235A

2

RAUCKMAN UTILITY PRODUCTS  •  METERPULLER® OWNER/OPERATOR MANUAL

ELECTROCUTION HAZARD

 

Avoid Personal Injury or Death. Do not use this tool 

until you have completely read the owner’s manual.

Also see www.rauckmanutility.com 

for safety information.

WARNING

I.  Preliminary

1.  The safety of the tool and of the work site are the responsibility of the worker 

and his supervisors, who are the only individuals who can evaluate whether it 

is safe to work.

II.  General Instructions

1.  All workers are required to wear proper Personal Protection Equipment (PPE), 

to be identified and provided by the Employer or otherwise mandated by appli-

cable Regulations.

2.  PPE shall be used at all times, without exception.
3.  All workers must be trained and determined to be qualified on the use of 

 

the tools, on accident risks, safety devices, accident prevention procedures 

and applicable regulations. The qualified worker is defined as one who  

demonstrates skills and knowledge related to the construction and operation 

of electric equipment and installations and has received safety training to 

identify the hazards and reduce the associated risk.

4.  Never allow bystanders near the work area.
5.  Immediately alert your superviser of any hazardous conditions or irregularities 

which could result in an accident, even if the chance of an accident is slim.

6.  In the event of any unforseen, unanticipated or unexpected situation or occur-

rence of any type during work, immediately stop work and evacuate the area. 

Notify appropriate supervising personnel.

7.  Electrical shock can result if the user fails to maintain a safe and proper Min-

imum Approach Distance (MAD) as mandated by OSHA, local regulators, or 

employer work rules, whichever is greatest.

8.  Tools should not be laid on the ground because of possible moisture contami-

nation or wetting.

III.  Before Each Use

1.  If any defect, contamination, or other issue is noted which could possibly 

adversely affect mechanical integrity of the tool, DO NOT USE THE TOOL.

Summary of Contents for METERPULLER M-001









Reviews: