www.rauckmanutility.com
Doc. No. RUPMP3235A
7
RAUCKMAN UTILITY PRODUCTS • METERPULLER® OWNER/OPERATOR MANUAL
OPTIONAL ARC SHIELD
The MPS-002A Arc Shield
is a polycarbonate disc that
is sold separately and may
be installed on either M-001
or M-002A Meterpullers®. It
keeps the hands away from
the meter base and offers pro-
tection for the body and hands
in a flash event.
INSTALLING THE ARC SHIELD
- Place the Arc Shield on top of the
METERPULLER®, inserting the ring
on top of the Meterpuller into the slot
under the Arc Shield.
- Use the two holes in the disc to mark
the placement of the bolt holes.
- Use a ¼” bit to drill the two holes.
- Insert the nylon bolts from inside the
METERPULLER®, and finger tighten
the wing nuts
The operation of the M-001 and M-002A
is unchanged with the addition of the
MPS-002A Arc Shield.
