Instructions for Use MPR1 DATALOGGER
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
Page 95 of 98
11.2 Environmental conditions
11.2.1 Operating and storage temperature
Operating temperature:
+ 10° Celsius ... + 40° Celsius
Storage temperature:
- 10° Celsius ... + 40° Celsius (for 1 month maximum
55°Celsius permissible)
If the apparatus has been taken from colder into warmer surroundings, it may be used only when the
temperature of the apparatus and of the accessories has adapted to the room temperature; there is no
danger of condensation water forming or any condensation water already developed has completely dried.
A longer period of storage at over 35° Celsius reduces the service life of the battery. As a matter of principle
the apparatus should be stored with a fully charged battery. At storage temperatures of over 35° Celsius,
the battery pack has to be charged every three months; once a year at lower temperatures.
11.2.2 Humidity
The relative humidity during operation has to be between 30 and 75 %, and between 30 and 85 % (non-
condensing) during storage and transport.
11.2.3 Atmospheric pressure
The atmospheric pressure during operation, storage and transport has to be between 620 and 1050 hPa.
During operation, the permissible air pressure is 700 to 1050 hPa for devices for which the use of the mains
adapter REF 284007-002 is specified. For instruments for which the use of the 284027-001 mains adapter
is specified, the permissible range is 620 to 1050 hPa.
12 Environment and disposal
All components of the MPR1 inclusive of its packaging have been selected, designed and marked in such
a way that the highest possible degree of environmental friendliness is achieved. The box is 100 per cent
recyclable. All parts of the MPR1 have been marked and can be separated, re-used or disposed of by
specialised enterprises. The mobile power supply is by NiMH type battery pack which is free from cadmium.
However, it should not be disposed of in the residual waste. Defect products and/or products no longer
used can be returned to the manufacturer for disposal.
13 Liability and warranty
The customer or user shall be obligated to check the suitability for the intended purpose of application, in
particular by suitable functional tests. RAUMEDIC shall assume no explicit or implied warranty, guarantee
or liability for the suitability for any purpose which exceeds the description of the article in these instructions
of use. This shall apply also for the processing of this article and for its use for the production of other
articles. The warranty terms of RAUMEDIC shall be applicable exclusively.
These instructions for use shall be protected by copyright. The rights derived, in particular those in the
translation, reproduction, use of illustrations, radio transmission, representation by photo-mechanical or
similar way and the storage in data processing systems, shall be reserved.
This
document
is
for
information
only
