GB
Page 16 of 64
INSTRUCTION, USE AND
MAINTENANCE MANUAL
3
1
2
1
2
3
4
4
Fig. 18
5. Fasten the cable with clamps.
6. Enable the external data gauge and carry out the
device's calibration.
Fig. 19
9.3.5 Fitting the wheel cover
1. Mount the protection guard (
Fig. 19 ref. 1
) to the
support (
Fig. 19 ref. 2
) using the screws (
Fig. 19
ref. 3
), interposing the Belleville washers (
Fig. 19
ref. 4
).
2. Tighten the screws (
Fig. 19 ref. 3
) in order to make
the guard (
Fig. 19 ref. 1
) lift or lower without
bumping against the limit switch. Carry out the
adjustment so that it's possible to manually guide
the guard both during closing and opening.
DURING GUARD'S ASSEMBLY,
PAY ATTENTION TO THE MICRO
PLACED INSIDE THE MACHINE.
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
1297-M010-0_R
