INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 19 of 64
1
2
1
2
3
3
1
2
4. Fit the protection cap (
Fig. 23 ref. 1
) in the locknut
(
Fig. 23 ref. 2
) and fasten against the wheel.
Fig. 23
Fig. 24
Some aluminium wheels, with very high centring, must
be fitted with the cone outside the wheel.
5. Clean the mandrel (
Fig. 24 ref. 1
) before fitting
the wheel.
6. Fit the wheel (
Fig. 24 ref. 3
) with the inside of the
rim towards the wheel balancer, until the wheel is
up against the support flange (
Fig. 24 ref. 2
).
Fig. 25
7. Fit the cone (
Fig. 25 ref. 3
) with the narrowest part
turned towards the wheel
8. Fit the grip-ring (
Fig. 25 ref. 1
) in the nut (
Fig. 25
ref. 2
) and fasten the cone (
Fig. 25 ref. 3
).
1297-M010-0_R
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
