GB
Page 42 of 64
INSTRUCTION, USE AND
MAINTENANCE MANUAL
At this point, the system will display the quantity of
the two weights to be fitted on the wheel (see
Fig. 80
).
Using the keys corresponding to icons
and
, the operator can increase or decrease the
quantity of the weights in the awareness that, the bigger
the weights, the bigger the distance will automatically
be between them.
Fig. 80
1
2
3
5
KEY
1 – Choose the weights to be fitted and confirm
2 – Display of program previous page (RED) (F1)
3 – The weight to be fitted increases (YELLOW)(F2)
4 – The weight to be fitted decreases (BLUE)(F2)
5 – Confirms selection and continues (GREEN)(F4)
1
4
Choose the value of the weights to be fitted and press
“key F4”
to confirm.
Turn the wheel at the point indicated by the arrows,
until the correct position has been reached to correct
the unbalance (see Par. 15.3.2).
When this position is reached, press the pedal brake
to stop the wheel, fit the FIRST weight.
Fig. 81
Arrows to help positioning in correction
weight fitting point
The monitor again displays
Fig. 81
. Turn wheel at the
point indicated by the direction arrows, press the pedal
brake to stop the wheel, and fit the SECOND weight.
The inner side operation is complete, press “CENTR"
key to quit
Press the SPLIT function key
again (to
perform the same operation for the outer side of the
wheel) or fit the outer weight on the top part of the
wheel, at 12 o' clock.
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
1297-M010-0_R
