GB
Page 44 of 64
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Fig. 86
3
5
KEY
1 – Arrows to help positioning in correction weight
fitting point
2 – Total weight
3 – Return to previous screen page (RED) (F1)
4 – Displays exact unbalance (resolution 1 g instead
of 5 g) (CENTRAL)
5 – Confirm and continue second weight positioning
(GREEN) (F4)
4
1 2
Correctly position the wheel (see Par. 15.3.2) and stop
the wheel by means of the pedal brake.
Fit the adhesive weight (in the example this is 20g) in
the automatic gauge as shown in
Fig. 87
.
Fig. 87
Fit the adhesive weight inside the spoke at the point
indicated on the display screen in
Fig. 88
.
Fig. 88
Exact position of wheel for fit-
ting weight
Exact weight fitting position in-
side the spoke
Press the “F4 key” to confirm weight positioning behind
the spoke and continue.
The display screen will show the page in
Fig. 86
for
fitting the second weight.
Correctly position the wheel (see Par. 15.3.2) and stop
this by means of the pedal brake.
Fit the second adhesive weight in the automatic gauge
as shown in
Fig. 87
.
Fit the adhesive weight inside the spoke at the point
indicated on the display screen in
Fig. 88
.
Press the “F4 key" to confirm positioning of second
weight behind the spoke.
The system displays the initial unbalance situation
before performing the SPOKES procedure.
Perform another test spin.
The SPOKES procedure is completed.
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
1297-M010-0_R
