INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 63 of 64
The validity of the Conformity Declaration enclosed
to this manual is also extended to products and/or
devices the machine model object of the Conformity
Declaration can be equipped with.
27.0 REGISTRATION PLATE DATA
25.0 STORING
If storing for long periods disconnect the main power
supply and take measures to protect the machine from
dust build-up. Lubricate parts that could be damaged
from drying out.
26.0 SCRAPPING
When the decision is taken not to make further use of
the machine, it is advisable to make it inoperative by
removing the connection pressure hoses.
The machine is to be considered as special waste and
should be dismantled into homogeneous parts.
Dispose of it in accordance with current legislation.
26.1 Instructions for the correct manage-
ment of waste from electric and elec-
tronic equipment (in italian RAEE)
according to legislative decree 151/05
• RAEE may not be disposed of as urban waste.
• These kinds of waste must be collected separately
and taken to dedicated collection and recycling cen-
tres, according to OEM instructions and abiding by
national laws.
• The symbol showed in
Fig. 124
, applied on the
product, means that anyone wishing to dispose of the
waste must follow the above-mentioned instructions.
• Any incorrect management of the waste or its parts
or its abandonment outside dedicated areas could
contaminate the environment, owing to the danger-
ous substances contained in it, and cause damage
to human health, flora and fauna.
• National laws provide for sanctions against those
responsible for illegal disposal or abandonment of
waste from electric and electronic equipment.
Fig. 124
ATTENTION: DO NOT TAMPER
WITH, CARVE, CHANGE OR RE-
MOVE THE MACHINE IDENTIFI-
CATION PLATE;DO NOT COVER
IT WITH PANELS, ETC., SINCE IT
MUST ALWAYS BE VISIBLE.
Said plate must always be kept clean from grease
residues or filth generally.
WARNING: Should the plate be accidentally damaged
(removed from the machine,damaged or even par-
tially illegible) inform immediately the manufacturer.
28.0 FUNCTIONAL DIAGRAMS
Here follows a list of the machine functional diagrams.
1297-M010-0_R
G2.124R - GP2.124R
RAVAGLIOLI S.p.A.
